|
The SDPV Preview System is a Cost Effective Solution
With backing accidents becoming more common and repair cost ever increasing, the PreView system is a cost-effective object detection device. The PreView system was designed with patented technology that utilitizes a minimum number of standard components. State-of-the-art design for manufacturability and test practices were used from the initial stages of development to the volume production stage.
Small, Compact Size with concise In-cab LED display and audio warning system
The detection unit mounted to the vehicle is circular and measures 5.25” in diameter. It can be mounted on a bracket or mounted behind any non-metallic surface.
The Standard PreView system’s in-cab display unit utilizes a series of L.E.D to display relative distance to the object. The display unit also provides an audible tone that increases in speed as an object becomes closer. The in-cab display can be mounted anywhere in the cab, providing the operator with the optimum flexibility to meet their needs. In addition, a volume switch has been added to allow three different buzzer volume settings.
SPV Preview System Specifications (Typical)
Sensor: Pulsed RF Transmitter at 5.8GHz
Electronics: Solid state
Sealing: Encapsulated to protect from dust, moisture and vibration.
Housing Material:
Radar sensor: Polycarbonate radome, Aluminum back plate
Operator display: Polycarbonate/ABS alloy
Weight
Radar Sensor: 1.75 lb. (0.8 kg)
Operator display: 0.25 lb. (0.11 kg)
Mounting Radar Sensor: Three 0.188” (4.8mm) diameter.
Operator display: User dependent
Operating Temperature: All unit’s: -40 F to +185 F (-40 C to +85 C)
ELECTRICAL SPECIFICATIONS
Input Voltage: 9-33 volts DC
Input current: 0.25 amp maximum .
Polarity: Polarity protected
Power Connection: Two 18 AWG wires
Relay Output: Normally Open, 1 amp maximum continuous
MAINTENANCE: Daily: Follow test and maintenance procedure.
REGULATORY COMPLIANCE: Compliant with FCC Part 15.249 (5725-5875MHz).
Dimensions: Radar Sensor: 5.25” diameter x 1.25” deep [13.3cm x 3.2cm]
Operator display: 1.00”H x 2.25”W x 2.00”D [2.5cm x 5.7cm x 5.1cm]
|
Zoom