PreView® WorkSight

PreView® WorkSight

Brand: Preco Electronics
Origin: USA


Preco’s engineering team developed PreView WorkSight for vehicles that require full blind spot coverage. With its dual antennas, the sensor protects objects very close to the bumper and up to 20’ behind the vehicle. PreView WorkSight will work as a single sensor system for rear coverage and can also be networked together to provide both front and rear blind spot coverage for larger vehicles.

Features and Benefits

  • Detection range up to 20ft/6m, with the ability to set detection zone as low as 10ft/3m
  • Current Draw: Less than .25 AMP
  • Connects to reverse lights for power
  • Operating Temp: -40 F/ +185 F (-40 C to +85 C)
  • Sensor Dimensions: 4.4”H x 10.5”W x 1.4”D
  • Display Dimensions: 1.0”H x 2.3”W x 2.0”D
  • Ability to customize detection zone onsite with PrecoNet Service Tool
  • Built to meet rugged J1455 Specs
  • Utilizes standard CAN communication protocols

PreView® WorkSight Specifications

Detection Ranges20 feet (6M), 15 feet (4.5M), 10 feet (3M)
Warning Ranges5 zones
TransmitterPulsed RF transmitter at 5.8GHz operating under FCC Part 15.249
Voltage9-33VDC
ElectronicsSolid state
Current Draw0.2 amp maximum, inrush current limited to 1A
Vibration25G RMS all three axes
Shock25G all three axes
IP RatingIP67 (encapsulated to protect from dust and moisture)
Operating Temperature-40°F/-40°C to +185°F/+85°C
ComplianceCompliant with FCC Part 15.249 (5725-5875MHz).
FCC ID: OXZWZPV2009
‘CE’ ‘E’ mark E11 10R-035418
Data Update Rate70 MS
PolarityNegative ground, Polarity protected to 150V
Transient Spike ProtectionOver voltage protected to 150V
Housing MaterialPolycarbonate radome
Sensor Dimensions4.4”H x 10.5"W x 1.4"D (11.2cm x 26.7cm x 3.6cm)
Display Dimensions1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm)
Sensor Weight2.3 lb. (1.04 kg)
Display Weight0.25 lb. (0.11 kg)
Sensor MountFour 0.25" (6.4mm) diameter holes on 8.54”,
Horizontal centers and 2.00” vertical centers.
Unit is supplied with #10 SS screws for mounting purposes.
Recommended torque is 22 inch-lbs.
Display MountUser dependent
Compatible WithPrecoNet Service Tool
System ComponentsWorkSight PreView® Sensor(s), In-cab display unit,
Cable system to connect the sensor and display

Specification Sheets

Manuals

Installation Guide

Vehicle Types

955   965


Applications: Vehicles, Heavy-duty machinery, mining