WorkSight PreView® for Waste

WorkSight PreView® for Waste

Brand: Collision Alert Systems
Origin: USA


  • Decrease blind zone accidents
  • Dual antennas for flexible ranging
  • Detection beam supports narrow applications

The double antennas provide the close-in detection needed to protect objects very close to the bumper of the vehicle, while simultaneously detecting objects as far away as 20 ft/6m without dramatically increasing the width of the detection pattern. Additionally, WorkSight PreView® will work as a single-sensor system for directly behind the vehicle, or networks together in a multi-sensor network system to provide both front and rear detection for larger vehicles.

MADE FOR HEAVY EQUIPMENT
This is not an automotive-grade ultrasonic technology posing as a heavy equipment solution. WorkSight PreView® is powered by our patented pulsed radar technology. Simply put, it detects objects in the most extreme weather and working conditions – the conditions that heavy equipment and vehicles must maneuver through daily. PreView® is real safety for real equipment.

Features & Benefits

  • Rugged sensor detects objects in extreme conditions
  • In-cab warning allows drivers to react faster
  • Narrow detection pattern reduces nuisance alarms
  • Close-in resolution provides better bumper coverage
  • Allows for single or multi-sensor configuration
  • Integrates with other safety tools

Specifications

Detection Ranges20 feet (6M), 15 feet (4.5M), 10 feet (3M)
Warning Ranges5 zones
TransmitterPulsed RF transmitter at 5.8GHz operating under FCC Part 15.249
Voltage9-33VDC
ElectronicsSolid state
Current Draw0.2 amp maximum, inrush current limited to 1A
Vibration25G RMS all three axes
Shock25G all three axes
IP RatingIP67 (encapsulated to protect from dust and moisture)
Operating Temperature-40°F/-40°C to +185°F/+85°C
ComplianceCompliant with FCC Part 15.249 (5725-5875MHz).
FCC ID: OXZWZPV2009
‘CE’ ‘E’ mark E11 10R-035418
Data Update Rate70 MS
PolarityNegative ground, Polarity protected to 150V
Transient Spike ProtectionOver voltage protected to 150V
Housing MaterialPolycarbonate radome
Sensor Dimensions4.4”H x 10.5"W x 1.4"D (11.2cm x 26.7cm x 3.6cm)
Display Dimensions1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm)
Sensor Weight2.3 lb. (1.04 kg)
Display Weight0.25 lb. (0.11 kg)
Sensor MountFour 0.25" (6.4mm) diameter holes on 8.54”,
Horizontal centers and 2.00” vertical centers.
Unit is supplied with #10 SS screws for mounting purposes.
Recommended torque is 22 inch-lbs.
Display MountUser dependent
Compatible WithPrecoNet Service Tool
System ComponentsWorkSight PreView® Sensor(s), In-cab display unit,
Cable system to connect the sensor and display

Specification Sheets

Manuals

Installation Guide

Vehicle Types

955   965

Part#
Description
Usually ships: 4-6W
Sell Qty: EA
Ship Weight: 5.1 lbs (2.3 kg)
Catalog page: NEW
Usually ships: 4-6W
Sell Qty: EA
Ship Weight: 0
Catalog page: NEW
Usually ships: 4-6W
Sell Qty: EA
Ship Weight: 0
Catalog page: NEW