Xtreme Duty PreView®

Xtreme Duty PreView®

Brand: Collision Alert Systems
Origin: USA




Preco SAS – Safety Alert System™
PreView® puts the control back into the hands of your operators, your first line of defense against accidents.

  • Stand-alone proximity detection solution
  • Increase mine site safety
  • Easily integrates with other safety tools

Xtreme PreView® is a pulsed radar object detection solution designed to detect moving and stationary objects in blind spots to significantly reduce accidents. PreView® consists of three simple components:

  1. External sensor(s)
  2. In-cab display(s) to provide audible and visual notification to the operator
  3. Robust cable system to connect the sensor and display. Coverage area can be up to 32ft/10m depending on the sensor chosen and your specific needs.



Installing PreView Extreme on a Mining Haul Truck

Built for the rugged mining environment, Xtreme PreView® detects objects through fog, snow, rain, dirt, mud, debris, and other extreme elements and weather conditions. Once an object is detected, the in-cab display provides ranging information to the operator so he can react before an accident occurs.

In comparison to other PreView® Radar sensors, Xtreme PreView® offers the longest detection zone. The in-cab LED display shows the proximity to the object(s) detected. The result is safer manoeuvring and detection for busy mining sites.

Features & Benefits

  • Prevent injuries and fatalities – Accidents, whether they happen under ground or above ground, can be tragic and irreversible events. Compounding this may be potential negative repercussions from stakeholders. By preventing accidents, PreView® lets you stay focused on your business and its bottom line.
  • Lower costs – Not all accidents end tragically, but many of them can cost a small fortune.  Sometimes a minor collision bender can run a quarter of a million dollars, significantly more expensive than a PreView® safety device.  Not to mention, the accident and unwanted attention could lead to reactive and costly safety measures and increased insurance premiums.
  • Reduce downtime – The more your machines are in for repair, the more it costs you in lost productivity.  PreView® can help lower the risk of accident and need for repairs and keep your machines on the job, not in the shop.
  • Improve site efficiency – No longer will fog or inclement weather slow down your operations or make them unsafe.  Machines fitted with the PreView® detection system use pulse radar, not just cameras, to detect, for instance, the safety berms installed on the side of the road or at dump locations.

PreView Xtreme Sensor Specifications

ModelXPV4220A, XPV4226A, and XPV4232A
Detection Ranges10m (32')
Programmable Ranges3 to 10m (10' to 32')
Warning Ranges5 zones divided into programmed range
Minimum Resolution0.3m (1')
Transmitter FrequencyPulsed RF transmitter at 5.8GHz operating under FCC
Voltage9-33V DC
Current Draw0.2A maximum, inrush current limited to 1A
Operating Temperature-40°F to +185°F (-40°C to +85°C)
Vibration25G RMS all three axes
Shock25G all three axes
Physical LayerCAN 2.0B, 250 KB/s
Data Upload Rate70 ms
Protocal LayerSAE J1939 Extended, Built to meet rugged SAE J1455 Specs
ConnectorDeutsch DT06-08SA-E008
SealingElectronics sealed from dust and moisture
Voltage ProtectionOver voltage protected to 150V
PolarityNegative ground, Polarity protected to 150V
Power ConnectionAvailable through sensor connector
Auxiliary Output+150V tolerant, Active State: switched to ground, over
current protected to 1 amp sink maximum. Inactive State:
high impedance
Housing (sensor)Polycarbonate radome
ComplianceCompliant with FCC Part 15.249 (5725-5875MHz),
FCC ID: OXZPV2000A
Sensor MountFour 0.328" (8.3mm) diameter holes on 6.50” horizontal centres, and 5.00” vertical centres.
Unit is supplied with ¼-20 screws for mounting purposes.
Recommended torque is 50 inch-lbs.
Sensor Weight1.0 kg (2.2 lb)
Sensor Dimensions (DxWxH)2.39x7.35x7.56" (6x18.7x19.2mm)

PreView Xtreme Display Specifications

ModelCD6102, XPV4103, and XPV4104
Housing (sensor)Polycarbonate / ABS alloy
Display MountUser dependent
Display Weight0.11 kg (0.25 lb)
Display Dimensions (DxWxH)2.39x7.35x7.56" (6x18.7x19.2mm)

Specification Sheets

Manuals

Installation Guide

Reduce your blind spot accidents by more than 75% like other PreView customers.
For more information click on the PDFs below:

Accident Stories

969   958

Vehicle Types

966   967  968

972   971   975

970   973   963

 

 


Applications: Heavy Equipment, Mining, Agriculture, Oil & Gas, Construction, Material Handling, Port & Marine, Military, Utility

Part#
Description
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.5 lbs (0.23 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.5 lbs (0.23 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.5 lbs (0.23 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 6 lbs (2.72 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 6 lbs (2.72 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 6 lbs (2.72 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.5 lbs (0.23 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 1 lbs (0.45 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.3 lbs (0.14 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 1 lbs (0.45 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.3 lbs (0.14 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 0.3 lbs (0.14 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 4 lbs (1.81 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 8 lbs (3.63 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 6 lbs (2.72 kg)
Catalog page: NEW
Usually ships: 5D
Sell Qty: EA
Ship Weight: 3 lbs (1.36 kg)
Catalog page: NEW