PreView® WorkSight

Haga clic para ampliar

PreView® WorkSight

Marca: Vista previa
Origen: EE.UU.

Haga clic para:

- Características y ventajas
- Fotos e imágenes
- Tabla de especificaciones
- Folleto de especificaciones (PDF)
- Solicitud de piezas
- Productos relacionados

Preco’s engineering team developed PreView WorkSight for vehicles that require full blind spot coverage. With its dual antennas, the sensor protects objects very close to the bumper and up to 20’ behind the vehicle. PreView WorkSight will work as a single sensor system for rear coverage and can also be networked together to provide both front and rear blind spot coverage for larger vehicles.

PreView® WorkSight Features & Benefits ▲

Detection range up to 20ft/6m, with the ability to set detection zone as low as 10ft/3m
Consumo de corriente: Menos de 0,25 AMP
Se conecta a las luces de marcha atrás
Temperatura de funcionamiento: -40 F/ +185 F (-40 C a +85 C)
Sensor Dimensions: 4.4”H x 10.5”W x 1.4”D
Dimensiones de la pantalla: 1,0" alto x 2,3" ancho x 2,0" fondo
Ability to customize detection zone onsite with PrecoNet Service Tool
Fabricado para cumplir las exigentes especificaciones J1455
Utiliza protocolos de comunicación CAN estándar

PreView® WorkSight Specifications ▲

Detection Ranges	20 feet (6M), 15 feet (4.5M), 10 feet (3M)
Warning Ranges	5 zones
Transmisor	Pulsed RF transmitter at 5.8GHz operating under FCC Part 15.249
Tensión	9-33VDC
Electronics	Solid state
Consumo de corriente	0.2 amp maximum, inrush current limited to 1A
Vibración	25G RMS all three axes
Choque	25G all three axes
Clasificación IP	IP67 (encapsulated to protect from dust and moisture)
Temperatura de funcionamiento	-40°F/-40°C to +185°F/+85°C
Conformidad	Compliant with FCC Part 15.249 (5725-5875MHz). FCC ID: OXZWZPV2009 ‘CE’ ‘E’ mark E11 10R-035418
Velocidad de actualización de datos	70 MS
Polaridad	Negative ground, Polarity protected to 150V
Protección contra picos transitorios	Over voltage protected to 150V
Material de la carcasa	Radomo de policarbonato
Sensor Dimensions	4.4”H x 10.5"W x 1.4"D (11.2cm x 26.7cm x 3.6cm)
Display Dimensions	1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm)
Peso del sensor	2.3 lb. (1.04 kg)
Display Weight	0.25 lb. (0.11 kg)
Montaje del sensor	Four 0.25" (6.4mm) diameter holes on 8.54”, Horizontal centers and 2.00” vertical centers. Unit is supplied with #10 SS screws for mounting purposes. Recommended torque is 22 inch-lbs.
Display Mount	User dependent
Compatible With	PrecoNet Service Tool
System Components	WorkSight PreView® Sensor(s), In-cab display unit, Cable system to connect the sensor and display