PreView® WorkSight for Waste

PreView® WorkSight para residuos

Haga clic para ampliar

WorkSight PreView® for Waste

Marca: Vista previa
Origen: EE.UU.

Haga clic para:

- Características y ventajas
- Fotos e imágenes
- Tabla de especificaciones
- Folleto de especificaciones (PDF)
- Solicitud de piezas
- Productos relacionados

The double antennas provide the close-in detection needed to protect objects very close to the bumper of the vehicle, while simultaneously detecting objects as far away as 20 ft/6m without dramatically increasing the width of the detection pattern. Additionally, WorkSight PreView® will work as a single-sensor system for directly behind the vehicle, or networks together in a multi-sensor network system to provide both front and rear detection for larger vehicles.

Decrease blind zone accidents
Dual antennas for flexible ranging
Detection beam supports narrow applications

Made for Heavy Equipment
This is not an automotive-grade ultrasonic technology posing as a heavy equipment solution. WorkSight PreView® is powered by our patented pulsed radar technology. Simply put, it detects objects in the most extreme weather and working conditions – the conditions that heavy equipment and vehicles must maneuver through daily. PreView® is real safety for real equipment.

PreView® WorkSight for Waste Features & Benefits ▲

Rugged sensor detects objects in extreme conditions
In-cab warning allows drivers to react faster
Narrow detection pattern reduces nuisance alarms
Close-in resolution provides better bumper coverage
Allows for single or multi-sensor configuration
Integrates with other safety tools

PreView® WorkSight for Waste Specifications ▲

Detection Ranges	20 feet (6M), 15 feet (4.5M), 10 feet (3M)
Warning Ranges	5 zones
Transmisor	Pulsed RF transmitter at 5.8GHz operating under FCC Part 15.249
Tensión	9-33VDC
Electronics	Solid state
Consumo de corriente	0.2 amp maximum, inrush current limited to 1A
Vibración	25G RMS all three axes
Choque	25G all three axes
Clasificación IP	IP67 (encapsulated to protect from dust and moisture)
Temperatura de funcionamiento	-40°F/-40°C to +185°F/+85°C
Conformidad	Compliant with FCC Part 15.249 (5725-5875MHz). FCC ID: OXZWZPV2009 ‘CE’ ‘E’ mark E11 10R-035418
Velocidad de actualización de datos	70 MS
Polaridad	Negative ground, Polarity protected to 150V
Protección contra picos transitorios	Over voltage protected to 150V
Material de la carcasa	Radomo de policarbonato
Sensor Dimensions	4.4”H x 10.5"W x 1.4"D (11.2cm x 26.7cm x 3.6cm)
Display Dimensions	1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm)
Peso del sensor	2.3 lb. (1.04 kg)
Display Weight	0.25 lb. (0.11 kg)
Montaje del sensor	Four 0.25" (6.4mm) diameter holes on 8.54”, Horizontal centers and 2.00” vertical centers. Unit is supplied with #10 SS screws for mounting purposes. Recommended torque is 22 inch-lbs.
Display Mount	User dependent
Compatible With	PrecoNet Service Tool
System Components	WorkSight PreView® Sensor(s), In-cab display unit, Cable system to connect the sensor and display